MSefi.com read only forum (Jan.15,2018)

UnaClocker wrote:I posted a bit of a synopsis of the meet for the Neon guys on the Neon forum, I could link you to that, if you're interested, but it is a bit slanted towards what those guys are interested in from the MS world..

Sure. It's all good information.


Thanks in advance.

Jim

Ok. I thought the plans were to video the talks. Thanks for the reply.


Jim

Were videos of this meet ever posted online???


Thanks,

Jim

schnitzer318is,
Does it matter what direction the air flowes through the IAC??

Thanks

Thanks schnitzer318is. I'm still trying to establish solid numbers for it. When I achieve something I'm happy with, I'll let you know.

Hi,

I'm trying to use a Volvo two-wire idle valve to control my idle. Can anyone tell me exactly which settings in TunerStudion control the PWM valve and which ones I can ignore? The documentation isn't clear about what applies to stepper motors valves and which are for PWm valves.

There's a pic ...

Hi,

The car is as follows;

1982 Jaguar xj6 (Euro Spec)
MS II code 2.890 V3.0 board
GM Coolant sensor
GM Intake Air Sensor
GM MAP sensor (1 bar)
Volvo 2-wire PWM Idle valve
Ford VR Sensor with EDIS 6
Using existing relays for fuel etc.

I finished installing the Volvo PWM IAC today. Prior to that ...

The TPS works now. Have to install the throttle body back in the car and see if it will start.

Actually, we wired the TPS exactly as per Nissan's instructions but it turns out that my throttle rotates the other way so yes, I had to swap the power and ground wires. It was Matt at DIY Autotune who pointed it out first. Thanks Matt!!

Hi,
Can anyone recommend a TPS for a bosch-style throttle body. It's on a 1982 Jaguar XJ6 that I'm megasquirting. The throttle body has the throttle shaft that comes out around 1.5 inches. The shaft has one side flattened and was originally designed to insert into a switch that indicated closed or ...

kholman wrote:JY=junkyard, I think

I see.

Thanks,

Jim

What are JY wires???

Jim

Hi,
Anyone have a reliable source for the spark-plug wire boots for the EDIS coilpack? I found Boost Engineering but there were a few comments about the length of time for them to respond. Anyone had any experience with them??

Thanks,

Jim

Hi,
Just received my MS goodies from DIY today. Can someone tell me if the instructions for assembling stim 2.1 also apply to 2.2? I can't find instructions specifically for version 2.2.

Thanks

Hi,
Can someone recommend a cheap wideband sensor to use with MSII? So far the only numbers I've seen are around $200. I have seen one reference to a JAW (Just Another WideBand) and a VW part 17014 from Advance auto Parts. What are these? Is the VW sensor a wide band or a narrow band?

In case it's ...