MSefi.com read only forum (Jan.15,2018)

Hi, I am a registered user and so far the auto-update always worked well (on HP mini-Windows 7 starter). Now I get an auto-update notification which I accept and every time the auto update starts but stalls after some hundreds of kB loaded.
How can I solve this?
tia

wiring is correct as the problem only exists near idle and a worn shaft would also exhibit unstability across the board (I admit, this is more difficult to detect)

So it sounds like a 'worn' spring? Where could I possibly find the partnumbers of the springs involved?

The idle speed of my engine is not stable, sometimes it floats around 1000 rpm, sometimes around 900. So I measured the resistance of the tps with an ohm-meter. The fixed resistor part is stable but the variable part has a variation from 20 up to 100 ohms, depending on the way you release the ...

I see. So what should be the typical setting for a Pinto 2.0 SOHC? Or how can I derive the proper value from a mlv file?

in MLV, you can set a delay on the lambda reading when tuning; what is the best setting for this delay for an LC1?
tia

Simple question, I did not find (or overlooked it) the meaning of the colours (red, green, blue) in the ve-table in MT. Can anyone help me understand?
tia
jos