MSefi.com read only forum (Jan.15,2018)

I played with it some this weekend after brother Jim helped me tweak the tables a couple of weeks before. I have not done the software calibration yet. Perhaps that will make a difference. Here is the data log from Sunday.

Yes, Dave, I had to pull the engine and change the bearings over the winter. Just now getting back to tuning.

I'll try that. I'm using an LC-1. Not sure what you mean by calibration data. I did recalibrate the sensor in fresh air following Innovate's instructions. Am I missing something in TunerStudio?

The datalog from Sunday's drive.
The tune.


Thanks!

Posted is a data log from yesterday afternoon. Thanks for any input!

I got the TR4A running again, found issues with the coolant temp sensor (bad socket) and starting trying to tune it again. I need some assistance at this point. I have TunerStudio and a wideband Oxygen sensor. I have made a couple of datalogs. Where can I post those for someone with expertise to ...

Possibly this is more tied to the ignition map. I have tweaked it some after talking to Jim Blackwood, but right now I can't get TS to connect to my controller. It cannot recognize the signature. It says my controller has * version. It should be 2.3....

Multiport EFI on a 66 Triumph TR4a. It idles nicely, but to pull out from a stop you have to gradually increase the throttle to get the revs up, then it has pretty good power but only for about 1/4 to 1/3 throttle. Push the gas any more than that and it stumbles badly. Let up on the gas and ease it ...

We got the car running. I am almost ready to try the Palm, but for some reason every time I tried to install PalmTune I get a fatal exception and have to reset the Palm. The icon appears on the palm, but it won't run. Does it need to be connected to the MS to run? I tried it on my Tungsten E, and it ...

so what you are saying is there are a couple of pins reversed for the MS. Why would they do that?

I just ordered a Palm M105 off ebay for $18, including the serial cradle. Now, what else do I need to use it?

Thanks,

Dan Blackwood
South Charleston, Wv
1966 Triumph TR4AIRS