MSefi.com read only forum (Jan.15,2018)

I have 6 injectors in the stock location, the part number for the stock injectors is 25323971 gm(they are plastic), and the ford ones I put in are green tops out of a 95 ford ranger flex fuel. I think I loaded my file up right, let me know if you see anything else that I should change. thanks

ok so I have a 3400 with a 3.57 ms2, I swaped in some green top ford Injectors that everyone I know says they are 42lb/hr.... but when I tried to start it, i had to bump the required fuel way up to like 42( im running E85) my required fuel was at 20 before and my air/fuels were close to what I want ...

thanks guys ill try that stuff tomarow am and let you know, thanks!

I dont have a sim, i need to get one when $ is freed up, I purchesed it from u guys, and other than this it is working great

ok I have a ms2 with the 3.57, in a cavalier with a 3.4 I just finished the swap. now the coolant temp alwase reads 180F

the thermistor table is as folows

the bias resistor is set at 2490

-20f = 50000 ohlms
25 f = 5220 ohlms
212f =177ohlms

the wire is now unpluged at the ms2 and if I ground ...