MSefi.com read only forum (Jan.15,2018)

I'm going for the BIP373's... so what is the best way to get those to work with my Ms2 V3,57 box?
Can i give the BIP373's an own box? i don't feel like soldering directly on to the MS.
and then make that BIP373 box work with the MS, wiring to the MS harness!? possible or not?

If i do EDIS - can i still use the standard crankwheel 60-2 with the hall sensor?
another option is the wasted spark coil pack... i have this one i can buy here in sweden http://shop.klracing.se/sv/artiklar/motorstyrning/givare-tillbehor/tandspole-6-cylindrar-wastespark.html but i dont know how to ...

Putting this thread in to life again...

Okay, trying to get some info on how to get my B6304S2 motor running with Coil On Plugs (preferd) or wasted spark!?
never tried this before... only got my 4 cyl redblock running with a single coil and distributor with hall-sensor.

i'm using MS2 V3,57 with ...

rumplestilskinfish wrote:turbobricks

http://forums.turbobricks.com/forumdisplay.php?f=21

your welcome..

Thanks! The turbobricks forum was very helpfull =) Alot of info about the engine it self =)
But if somebody has something to say, just let it out =)
brgds // Sweden

Hi there, i'm looking for some info on how and what i would need to know and do to get this (b6304) engine working with MS-II V3,57. Anyone in here made an installation on this engine before?

this is the 6 cylinder engine from Volvo 960.

Best way to trigger it?
Bes coils to use?
What more to ...

Hello Again...

I´m back home in sweden, and my car started
Thank u very much! very easy to fix but i´m a newbie so i dont think i would have tried that setting

Thanks again!
/ Nybakk the swede

ok, thx. i will try... but im in Norway right now for 2 weeks @ my work.
I will try when im home again and i´ll let you know what happens.

here´s my .msq file

using Megatune 2,25 P3
2,68 B&G code

Ok, one 1K resistor is already in place on the ECU. solderd on r57!?

If that's the distributor with the LH2.4, it will only have one tooth and is not suitable for spark control. If it's an earlier LH2.2 distributor, you will need a pull up resistor.

Ok, yes im using the earlier distributor LH2.2, so i need a 12v pull up resistor?
or what kind of resistor do i ...

An LH2.4 will need to be jumpered for VR input and you'd use the crank trigger instead. It's a 60-2 wheel. See this link for notes on how to set up a missing tooth wheel in MegaTune.

But i´m using a distributor with hall-sensor... (Triggering from there) not with the 60-2 wheel.
i think that ...

I bought a ready-assambled ms2 V3,57 wich i wired in my volvo 240 (b230f) None Turbo engine.

I wired the DIY harrness into the original volvo wire-harrness (?) language :) i´m swedish...
Using a standard coil (Lh2,4 system) and the hall-effect sensor is built in to the thing that divide´s ...