MSefi.com read only forum (Jan.15,2018)

Staged injections works with MS, and is the technique for bringing injectors in as the revs go above a threshold.

MS2 is better for this as it can bring the second set of injectors in over some engine cycles. MS1 doesn't have the power to do this.



Matt

Thanks David for your thoughts on this.

FWIW:

I discovered a few things:

1) The gsxr600 TPS is not spring loaded, and although it doesn't appear to have any slop, the later TPS that Suzuki used were spring loaded. I have now used one of those.

2) A simple way of making the TPS non-linear (more ...

David,

Sorry, poor wording.

By "messy" I meant, that the TPS ADC is not really representative of the amount of air going into the engine, and hence I have limited software control at these low throttle openings . Consequently the AFR is not as stable as I would like it to be. It isn't noisy (i.e ...

So, I was looking at the TPS output (using the excellent PalmLog software).

It hangs around at the lowest ADC setting for a long time. I can get the engine up to 3500rpm before it increments (from 58 to 59, maximum is 225). Actually the car works nicely, but I think logarithmic TPS might help my ...

Hi there,

I was wondering whether anyone had any success with logarithmic TPS. It seems to make sense on some installs (I have gsxr600 ITB's on a GSXR1100) and low opening are a bit messy, and AE isn't the best.

Just wondering if anyone had any experience. I found that Webcon can supply these (see ...