just an fyi... i have a battery at 6.3v on my v2.2 right now and she's dead as a doornail... no led function anywhere.
everything works nicely with my 12v power supply.
|
www.MSefi.comMegaSquirt EFI from Bowling and Grippo |
Search the MegaManual: |
Lowest stim voltage
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
by Loadedagain on Sun Mar 27, 2005 3:40 pm
-
Loadedagain - MegaSquirt Newbie
- Posts: 1
- Joined: Sun Jul 04, 2004 3:35 pm
- Location: North Vancouver, BC
by snillet on Fri Feb 24, 2006 1:08 am
My PCB2.2 MS1 dies at approximately 6.5 volts. It´s nearly useless on ONE 9V battery except for a very short period, so i have 2 battery connections on it now 
With dies i mean that it goes all dark on the leds and that the connection to Megatune is lost. Meashured the last voltage at the battery when that happened to 6.4 volts with a multimeter.
With dies i mean that it goes all dark on the leds and that the connection to Megatune is lost. Meashured the last voltage at the battery when that happened to 6.4 volts with a multimeter.
Peugeot/Citroen XU9 JAZ(4cyl 1.9litre) engine with 60-2 VR wheel decoding singel coil and dizzy spark and 360cc 0 280 150 431 injectors. Msns-E hi-res 10d2 and E85(Ethanol) in the gastank.
- snillet
- Helpful Squirter
- Posts: 49
- Joined: Tue Dec 06, 2005 12:43 pm
- Location: Sweden / Kungälv
by Crazy2287 on Tue Aug 22, 2006 3:37 am
I's just compleated my MS v2.2 and was messing with the rpm and the like and then i got 3 beeps and the MS shut down. That normal?
Not doing it now though, i got it hooked up to a motocycle 12V batt. Now i got no RPM reading, i think its just the transistor on the stim though.
Not doing it now though, i got it hooked up to a motocycle 12V batt. Now i got no RPM reading, i think its just the transistor on the stim though.
*insert witty comment here*
-
Crazy2287 - MegaSquirt Newbie
- Posts: 1
- Joined: Sun Aug 20, 2006 8:35 pm
- Location: NSW Australia
Return to MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting
Who is online
Users browsing this forum: blackotto and 1 guest
MegaSquirt® and MicroSquirt® are registered trademarks.
MegaSquirt® and MicroSquirt® controllers are experimental devices intended for educational and research purposes.
MegaSquirt® EFI is not for sale or use on pollution controlled vehicles. Check the laws that apply in your locality to determine if using a MegaSquirt® controller is legal for your application.
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group