And my 'TPSdot Threshold' doesn't have a % beside it either
MS-II(below)
My old Extra codelooked like this(below)
From the manual:(below pic)
Why does my 'Acceleration Wizard' look like this?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
panel
- Helpful Squirter
- Posts: 70
- Joined: Tue Aug 17, 2004 8:56 pm
- Location: Victoria B.C. Canada
- Contact:
Why does my 'Acceleration Wizard' look like this?
I just got my MS-II running from the MS-I extra code and noticed my accel enrichments look kinda weird. Those #'s look real high. Is it because of the v/sec and the %/sec etc change? If it was running great like I had it in the extra should I just change the settings? I noticed in the manual that it goes up to 200 and mine only goes up to 100
And my 'TPSdot Threshold' doesn't have a % beside it either
MS-II(below)
My old Extra codelooked like this(below)
From the manual:(below pic)
And my 'TPSdot Threshold' doesn't have a % beside it either
MS-II(below)
My old Extra codelooked like this(below)
From the manual:(below pic)
My VW Bus and MS pix CLICK
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.
-
panel
- Helpful Squirter
- Posts: 70
- Joined: Tue Aug 17, 2004 8:56 pm
- Location: Victoria B.C. Canada
- Contact:
Re: Why does my 'Acceleration Wizard' look like this?
How did this post get moved to the MSXtra forum? I'm not running the xtra code?
-
ForumAdminTeam
- Site Admin
- Posts: 78
- Joined: Mon Dec 25, 2006 8:45 am
Re: Why does my 'Acceleration Wizard' look like this?
Please include your code type when asking for tuning advice. Note that your signature says:
Forum Admin TeamMSnExtra July/06 EDIS Aug/06
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Why does my 'Acceleration Wizard' look like this?
Those values do look pretty high compared to the old ones. A rate of 15.1 volts per second would probably be more like 400% per second on a normal TPS.
-
panel
- Helpful Squirter
- Posts: 70
- Joined: Tue Aug 17, 2004 8:56 pm
- Location: Victoria B.C. Canada
- Contact:
Re: Why does my 'Acceleration Wizard' look like this?
Thanks for the feedback. It did look real high. I wonder why it was like this from the factory settings?Matt Cramer wrote:Those values do look pretty high compared to the old ones. A rate of 15.1 volts per second would probably be more like 400% per second on a normal TPS.
Those were like that from when I opened it up for the first time.
Is there a conversion from volts per second to % per second?
My VW Bus and MS pix CLICK
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Why does my 'Acceleration Wizard' look like this?
To get from volts/sec to %/sec, take the volts/sec value, divide it by the difference between voltage at WOT and voltage at closed throttle, multiply it by 100%.panel wrote:Is there a conversion from volts per second to % per second?
-
panel
- Helpful Squirter
- Posts: 70
- Joined: Tue Aug 17, 2004 8:56 pm
- Location: Victoria B.C. Canada
- Contact:
Re: Why does my 'Acceleration Wizard' look like this?
Thanks again Matt. It's coming a lot more clear to me. Hopefully the last question here..........
Is it just as simple as turning my 'TPS gauge' into volts (Megatune) to get this or is there a conversion from 'TPS ADC count value' into 'Volts'?
Is it just as simple as turning my 'TPS gauge' into volts (Megatune) to get this or is there a conversion from 'TPS ADC count value' into 'Volts'?
My VW Bus and MS pix CLICK
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.
Running on MS since July 22/05,
MSnSExtra July/06 EDIS Aug/06,
now MS-II July 1/10.