Is this how one wires injectors with 2 alternating banks on a 4 cyl? Does it matter which prong on the injector goes to 12v or the ecu? (Are they non-polar?)
Thanks.
Easy injector wiring question (with illustration!!!!!!!!!)
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Easy injector wiring question (with illustration!!!!!!!!!)
You do not have the required permissions to view the files attached to this post.
-
Traction Issuez
- MegaSquirt Newbie
- Posts: 2
- Joined: Tue Mar 14, 2006 5:33 am
Additional quick question that I haven't been able to locate. On a V8 application, because of the bank to bank layout, the yellow wire would actually be wired into 4 injectors on one side and the orange wire would be wired into 4 injectors on the other side?
Sorry for the question but I just received my harness last night and I'm a little confused by the schematic. Since the MS has the capacity to run 16 injectors then I'm "guessing" that each wire from the harness has the capacity to run 4 injectors. Is that the case or does each wire have the ability to run 4 high impedence injectors or 2 low impedence injectors?
thanks,
issuez
Sorry for the question but I just received my harness last night and I'm a little confused by the schematic. Since the MS has the capacity to run 16 injectors then I'm "guessing" that each wire from the harness has the capacity to run 4 injectors. Is that the case or does each wire have the ability to run 4 high impedence injectors or 2 low impedence injectors?
thanks,
issuez
Only mostly stupid