I looked around for a good "how to" on useing my OEM map, and setting it up on my jeep,with Ms2 but no go I beleive it has a Gm map on it,
I have not pulled it and looked at it, I did try the diffrent ini files
for GM maps but no go, The kPa was way low
Is there any info on this
Thanks
Ms2
Hall pickup
MegaTune225p1
v2.687
OEM map sensor
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
OEM map sensor
Last edited by Kent H. on Wed Nov 15, 2006 6:12 am, edited 1 time in total.
Squisted + Spark 91 4.0 Jeep Eliminator
Thanks for the reply David
I have my VE and spark maps ie (tables) pretty good.
I am trying to make this as close to a plug and play as possible.
I have everything worked out except the map=M_anifold A_bsolute P_ressure sensor and my cruise control.
No I'm talking about the OEM M_anifold A_bsolute P_ressure sensor.
I see in megatune 2,25pl that there is a sensor calibration for
a M.A.P.= M_anifold A_bsolute P_ressure sensor etc.
Can I use this like the the Thermistor calibrator or is this
(sensor calibration) only for a second sensor.
I have my VE and spark maps ie (tables) pretty good.
I am trying to make this as close to a plug and play as possible.
I have everything worked out except the map=M_anifold A_bsolute P_ressure sensor and my cruise control.
No I'm talking about the OEM M_anifold A_bsolute P_ressure sensor.
I see in megatune 2,25pl that there is a sensor calibration for
a M.A.P.= M_anifold A_bsolute P_ressure sensor etc.
Can I use this like the the Thermistor calibrator or is this
(sensor calibration) only for a second sensor.
Squisted + Spark 91 4.0 Jeep Eliminator
-
dridders
- MegaSquirt Newbie
- Posts: 3
- Joined: Thu Sep 07, 2006 7:14 am
- Location: Nuremberg, Germany
- Contact:
You can only enter the kPa-values at 0V and 5V, so at the limits. But as you cannot measure those you'll have to interpolate.
I have a setup with a 1 Bar GM sensor. Look at this page to find out what kind of MAP you have and whether its sufficient for your needs or not. If you want to keep the stock engine it of course is, if you want to use a turbo or modify boost then it might be not.
If you have a 1 Bar map I can give you the values for Megatune. If you have a spare port you can use the MS2-MAP for baro correction. You just have to rewire it.
I have a setup with a 1 Bar GM sensor. Look at this page to find out what kind of MAP you have and whether its sufficient for your needs or not. If you want to keep the stock engine it of course is, if you want to use a turbo or modify boost then it might be not.
If you have a 1 Bar map I can give you the values for Megatune. If you have a spare port you can use the MS2-MAP for baro correction. You just have to rewire it.