Building a car to run individual throttle bodies with injection controlled with a MS-II V3 and sparks courtesy of an EDIS4 set up.
I have a question about the 36-1 trigger wheel though, is there a specific size of wheel that I need to use? I have been looking at www.triggerwheels.com for the wheel but there are several different sized wheels.
Does the outside diameter matter as long as it is 36-1?
Thanks,
Spud
Trigger Wheel Size
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
spudmurphy
- MegaSquirt Newbie
- Posts: 4
- Joined: Wed Mar 01, 2006 5:12 am
- Location: Lancashire, UK
Trigger Wheel Size
All these new words are starting to make me feel a little bit sick.
Size doesn't matter. I'm running a 1-3/8" diameter 72-2 wheel inside a distributor housing with no problems. The pickup is the stock Mazda VR pickup, not the Ford part.
Roger.
Roger.
1979 Mazda RX-7, running MSnSExtra 08f-hires for fuel and spark control on a turbocharged, intercooled, and
(of course!) injected 13B rotary.
(of course!) injected 13B rotary.