DIYAutoTune.com-Your One-Stop EFI/EMS Shop- Mega-Everything!

[FoundSoul]

DIYAutoTune.com
MegaSquirt Units in kit form and completely assembled, Wideband o2 Systems from Innovate Motorsports, full Plug-N-Play 'MegaSquirtPNP Engine Management Systems, and more to come!



Complete MegaSquirt Kits
Includes all required components including the MS Partial Kit, Case with professionally machined endplates, and the entire BOM. Also includes a barbed bulkhead fitting and a tube of heatsink compound. It's everything you need, nicely labeled and organized in a single box.

Complete Assembled MegaSquirt Units
Completely Assembled and Tested. The crystal is glued in place and lockwashers are used on the screws/nuts to reduce sensitivity to vibrations. The MAP sensor input has been brought out to the outside of the case using a barbed bulkhead fitting. This allows for easy connection of your vacuum/boost line and prevents damage to the MAP sensor.



New at DIYAutoTune.com -- Delphi EV1 Style Fuel Injectors from 24lb/hr to 95lb/hr capacity!






Other Exciting Products!


MapDaddy 4-Bar Map Sensors with Barometric Correction are ready to rock your ride on up to 44psi!
It's here and we've got plenty ready to ship-- The 'MapDaddy' 4-bar Manifold Absolute Pressure (MAP) Sensor upgrade for the MegaSquirt, with one primary 4-bar MAP sensor for standard MAP Sensor duties, and a second for realtime barometric correction so that your fueling calculations will stay accurate in the event of an elevation change (mountain runs anyone?). The design was well thought through and is completely compatible with the MegaSquirt-I/MSnS-E firmware or the MegaSquirt-II, as well as with the MegaSquirt PCB2.2 and PCB3.0 units. Any hardware platform is good to go... Click the link above for more information!



Innovate Motorsports LM-2 and LC-1 Wideband o2 Systems and accessories (gauges, etc)


Assembly Tools, Tuning Cables, and more to come!

All items are generally kept in stock, and we always keep the lines of communication open with full time support on staff. If it's in stock it ships the same business day (orders received by 2pm EST). If you have questions you can email us at websales@DIYAutoTune.com.

For information, pricing and availability check out our site:
http://www.DIYAutoTune.com

[FoundSoul]

FYI-- the SMD PCBv3.57 units are now available...

MS-I PCBv3.57

MS-II PCBv3.57

[Toehead]

Damn, and just like that I'm outdated!


Looks great thought

[78Spit1500Fed]

That is one good lookin' store! You've made some upgrades!

[Eales V8]

Based in the UK it was with some concern I order from DIYAutoTune a LCdash, via the website and via paypal.

Here in the UK we have our fair share of poor service issues with stores - my goodness me what a shock I have had with Matt from DIYAutoTune.

A Couple of e-mail queries to him should have altered me, they were answered same day (time differance ?)

So I ordered.

About a week later a card dropped through my door, it was ready for local collection. BEAUTIFULLY packed, really really well packed, and the item itself is just fantastic !

Thanks 1,000,000 to Matt and all at DIYAutoTune, absolutely delighted with both the LCDash and The outstanding service

Pleasure to deal with !


Nige in the UK

[giuino]

Incredibly speedy service!!!

I ordered a V3.0 kit on 03/10 and arrived on 10/10... it was shipped about an hour later I paid... the kit is perfect, the quality of packaging is astonishing;

thanks a lot from an old italian megasquirter, Giuseppe

[Matt Cramer]

Another product announcement: We're adding 36-1 trigger wheels to our lineup, too. These are laser cut from 11 gauge (1/8" mild steel) and are available in three sizes to fit most common engines.



Click here for the trigger wheel catalog page

And we've working on documentation on how to use the trigger wheels, too:

DIY Autotune Trigger Wheel Guide

[TheMonkey]

Matt-

Why are the 4" wheels made with pointy teeth? what does the the signal look like on a scope, and what kind of adjustments, if any, are required on R52 & R56?

(btw, your online catalog lists it in the description as 44" diameter!).

Scott.

[Matt Cramer]

Matt-

Why are the 4" wheels made with pointy teeth? what does the the signal look like on a scope, and what kind of adjustments, if any, are required on R52 & R56?

We patterned it after small distributor triggers, which almost always have pointy teeth. It gives a pretty normal sine wave on a 'scope, with a bit of a larger amplitude on the teeth immediately before and after the missing one (which is pretty common on OEM triggers, too). These usually work best with R52 and R56 fully counterclockwise, although you may find R56 needs to be given a slight clockwise turn depending on your sensor, sensor gap, and code version.

(btw, your online catalog lists it in the description as 44" diameter!).

Scott.

Fixed. Thanks for pointing that out.

[ngt]

Got hte stuff in 5 dasy from Us to Greece. I am delighted !
Got a trigger wheel too. It weighs 420gr (the 6-inch wheel).

[bluethunder1975]

Great service. Kit took a bit to get here, but thats canada customs for ya.

Everything was in neat little bags, labled with part, #, and component #.

Made putting it together a breeze.

[Matt Cramer]

We've just added fuel injectors to our product lineup too. They range from 24 lb/hr to 95 lb/hr and work with both gasoline and alcohol.

[FoundSoul]

Check the new DIYPNP EMS we just released today-- full PNP EMS, you just add a bit of elbow grease. Fits more than 40 cars right out of the gate, and we've got many more in the works.







Click Here for a video that will give you a basic idea on the assembly.


Click here for stacks of information, docs, feature lists, etc. DIY PNP EFI made easy. Modular. Expandable. It's just pretty darn cool.


Feature List - Here's what you can do

* OEM ECU Connector to plug right into the factory harness!
* Speed Density, Alpha-N and Hybrid Alpha-N (both SD and A-N algorithms hybridized) Supported
* 2 Ignition Inputs (for dual wheel ignitions)
* 4 Spark Outputs (Up to 4 Cylinder Coil On Plug, up to 8 Cylinder Wasted Spark)
* Rotary Ignition Support
* Enhanced Acceleration Enrichment (EAE)
* Boost Control
* Knock Control
* Launch Control
* Flat Shift
* Tachometer Output
* Fully Adjustable Rev Limiter
* Table Switching
* 4 General PurposeOutputs
* 4 General Purpose Inputs (2 analog, 2 digital)
* Support for Flex Fuel
* Optional Realtime Baro Correction
* Closed Loop O2 Correction
* Plenty of Proto Area, add your own customizations!
*There's more than we could list here-- click this link to view the full featurelist of MS2/E.

Note: Some of the features listed above use the General Purpose Inputs/Outputs.






Feature List - Hardware Capabilities, aka, here's how you do it
Inputs

* Hall, optical, or VR crankshaft position sensor
* Second VR input for camshaft position sensor
* Flex Fuel Sensor Input
* 2 general purpose digital inputs for which can be used for launch control, table switching, etc.
* 2 general purpose analog inputs
* Onboard knock sensor conditioner
* Onboard 2.5bar MAP Sensor + support for optional MadDaddy 4bar upgrade with realtime baro correction
* Coolant Temperature Sensor
* Intake Temperature Sensor


Outputs

* 4 Logic Level Spark Outputs
* 4 BIP373 high current coil drivers
o Supports 1, 2, 3, or 4 cylinder COP/CPP (Coil on Plug, Coil per Plug) Ignition
o Supports 2, 4, 6, 8 cylinder wasted spark ignition
* Boost control output
* 4 general purpose on/off outputs - 2 on the module, 2 on the mainboard
* 2 injector outputs - Capable of driving 2 low-impedance or 8 high-impedance injectors
o Can easily support higher number of low impedance injectors via resistors or external Peak-n-Hold box
* PWM idle control output
* Fuel pump control

Note: Not all the features can be installed at the same time. In particular:

* The flex fuel sensor replaces one of the general purpose digital inputs.
* Knock sensing or barometric correction requires one of the analog inputs.
* Using three or four ignition outputs uses one or two of the general purpose on/off outputs, respectively.



Supports Speed Density and Alpha-N. As well as Hybrid Speed Density/Alpha-N

Optional MAF Sensor Support using MicroSquirt B&G Firmware instead of MS2/E firmware, though some of the other features above are not available with the B&G firmware - be aware of this when making your choice.

[FoundSoul]

Just a quick update on the DIYPNP - we just release a new model that fits a handful of BMW and Porsche models using the Bosch Motronic 55pin connector.


DIYPNP B55 (Bosch Motronic Style 55 pin) Part# DIYPNPB55-K

BMW 325 M20 1987-1992 * Check before ordering - a few 1987 and 1988 models used a 35 pin connector.
BMW 525 M20 1989-1990
BMW 535 M30 1989-1993
BMW M5 S38 1991-1993
Hyundai Scoupe all 1992-1995
Porsche 911 all 1990-1995
Porsche 944 S2 1989-1991
Porsche 968 all 1992-1995

[Matt Cramer]

Now, time for the next generation MSPNP!



We've just released the Gen 2 MSPNP for a wide range of makes and models! This lets you plug in a MicroSquirt based ECU running MS2/Extra code in place of the stock ECU. Features include support for low impedance injectors, boost control, 2 step rev limiter, a headphone jack for listening to a knock sensor, and more! Price is $799.

The full list of Gen 2 models includes 5 ECUs, covering 20 different models:

BMW: Part Number MSPNP2-B8793
'87-'92 E30 325 M20
'89-'90 525 M20
'89-'93 535 M30
'91-'93 M5 S38
'88-'92 735 M30


Mazda/Ford: Part number MSPNP2-MM9093
‘90-’93 Miata 1.6
'90-’94 Protege / 323 (1.6 and 1.
'91-'95 Escort GT 1.8
'90-'93 Festiva 1.3
'92-'93 Mazda MX3 1.6L I4


Mazda: Part number MSPNP2-MM9495
‘94-’95 Miata 1.8


Nissan: Part Number MSPNP2-NS8994
'89-'90 SOHC 240SX KA24E
'91-'94 DOHC 240SX KA24DE
‘91-’94 Sentra / NX1600 GA16DE
‘91-’94 Sentra / NX2000 SR20DE
‘91-’93 G20 SR20DE
‘90-’95 Hardbody KA24DE


Toyota: Part Number MSPNP2-T8590
'85-'90 Pickups / 4Runners (22RE and 22RTE)
'85-'89 MR2 4AGE
'85-'87 AE86 Corolla 4AGE

Order yours now at this link:

http://www.DIYAutoTune.com/catalog/mega ... -c-40.html

Or check this out for more info:

http://www.megasquirtpnp.com/

[Matt Cramer]

We have a lot of guys asking for MSPNPs for niche applications, and now we've come out with a way to partner with a car club, racing league, or Internet forum to make these happen. We can do this for any car that we have a connector for and that can be run off an MSPNP feature set. What we need from the enthusiast community is 10 people willing to pre-order and put down a $300 deposit, and the loan of a test car for a few months. Anyone who pre-orders gets a $100 discount if they order within 30 days of the MSPNP coming to market. Check out the details here:

http://www.megasquirtpnp.com/mspnp_on_demand.htm