fuel injectors mounted upside down?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
fuel injectors mounted upside down?
any downsides to mount a fuel injector upside down on the manifold? i cannot fit the injectors on the top of my manifold so they will have to be on the bottom with the rail.
Im no expert but it seems like I read somewhere that if you do it you want to make sure they stick up a bit so any fuel (or crud) does not pool on the tip and damage things.
73 Cadillac Eldorado convert Fairly stock 8.5:1 500cuin/8.2L
MSIIV3,2.88,relay board, LC-1,Older Holley 670cfm 2bbl TBI w/85lbhr injectors.
MSIIV3,2.88,relay board, LC-1,Older Holley 670cfm 2bbl TBI w/85lbhr injectors.