Hey, Hi, and Hello,
I just bought a 69 VW Bus, and I can't wait to throw the carburator off of that thing. I've been doing a lot of reading and research in the forum, but there's one thing that I can't quite find: for those of you who've installed the fuel injection on an old VW engine what injector setup did you use? Port or TBI? Wher injectors did you use? How did you mount them? Can I see pictures?
Thanks,
~bob
old VW question . . .
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Minami Kotaro
- Helpful Squirter
- Posts: 48
- Joined: Sun Sep 12, 2004 3:41 pm
- Location: Somewhere in TN
Re: old VW question . . .
Check the link in my signature. It's a Bug, but still the same engine. Feel free to email me any questions you may have.
akiratubo@hotmail.com
akiratubo@hotmail.com
-
devastator
- Experienced Squirter
- Posts: 333
- Joined: Mon Feb 11, 2008 10:19 am
- Location: Kinda near Tucson Arizona
Re: old VW question . . .
Minami's story is very informative and I read it myself when I started my ACVW project. Here's a list of some of my parts.:
45 LB injectors, (I'm running E85 and a turbo).
TB with included IAC off of a Dodge Neon.
IAT sensor, injector leads, and temp sensor off of same Neon.
CB Performance intake runners with home-made fuel rails, (CB offers these if you don't want to make them).
Home-made intake manifold and Turbo manifold.
Gutted and locked 009 distributor, (dizzy), with Pertonix pickup (and Coil).
I can send some pictures of the intake runners and the fuel rails if you want. BTW, I still have another set of these fuel rails if anyone wants to buy them.
45 LB injectors, (I'm running E85 and a turbo).
TB with included IAC off of a Dodge Neon.
IAT sensor, injector leads, and temp sensor off of same Neon.
CB Performance intake runners with home-made fuel rails, (CB offers these if you don't want to make them).
Home-made intake manifold and Turbo manifold.
Gutted and locked 009 distributor, (dizzy), with Pertonix pickup (and Coil).
I can send some pictures of the intake runners and the fuel rails if you want. BTW, I still have another set of these fuel rails if anyone wants to buy them.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished.
MS-II W/spark burning E85
The sand must be punished.