Racepak Data systems
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Racepak Data systems
Is anybody using the racepack dashes or boxes to datalog with the Megasquirt II ? Just wondering if there is any compatiblily problems etc. Seems like a nice way to go if I can afford it
"Any problem that is persuasive, persistent, or unprecedented is unlikely to be solved by hand me down principals."
Re: Racepak Data systems
Why would you spend all that money on a Racepack when you can datalog every paramater of MSII with megatune and a laptop.
Re: Racepak Data systems
Thats a good question..........
well, the cockpit of my car is 23 inches wide, wheelbase is 225" long with no suspension, and shakes hard when it does a burnout....... I guess i could mount it to the top of the cage???
I know, it seems silly to run a MS with a hi $$ datalogger, but what else do i do??
well, the cockpit of my car is 23 inches wide, wheelbase is 225" long with no suspension, and shakes hard when it does a burnout....... I guess i could mount it to the top of the cage???
I know, it seems silly to run a MS with a hi $$ datalogger, but what else do i do??
"Any problem that is persuasive, persistent, or unprecedented is unlikely to be solved by hand me down principals."
Re: Racepak Data systems
I'm running a Racepak GX2 in the car with the MSII.
As long as you can access a square wave tach signal, you should be fine.
As long as you can access a square wave tach signal, you should be fine.
80 Porsche 911 3.0
Carrera Intake/964 cams
MSII v3.57 SMD and relay board
MS II s/w 2.885 MT 225p3
Carrera Intake/964 cams
MSII v3.57 SMD and relay board
MS II s/w 2.885 MT 225p3
Re: Racepak Data systems
Have you checked out the Palmlog section of this forum. It work's really well and old Palm are a dime a dozen and small enough to put about anyplace.
Re: Racepak Data systems
Thanks for the info
I have looked into the palm log, I am sure it works good, I would just need to find the right palm to do the job. it looks like the older versions what you need.
I have looked into the palm log, I am sure it works good, I would just need to find the right palm to do the job. it looks like the older versions what you need.
"Any problem that is persuasive, persistent, or unprecedented is unlikely to be solved by hand me down principals."