Here is the breakdown of what I have done, and what is happening.
1. I was doing final testing on my board before hooking it up to the system.
2. Plugged it into the computer to do a final check on functionality and it worked fine for about 30 sec to 1 min (Note, I have used the board before on the computer with no glitches.)
3. Megatune starts to flicker in and out of working and then stops all together and goes to red gauges showing nothing.
4. Stim board is still showing lights, but they are acting funny. All of them flash at times, and sometimes none.
5. Check loop back on the board with Hyper Terminal. Checks fine. I get echo back with no problem, which includes having the stim board plugged in.
6. Hook everything back up and jumper the B/LD plug the stim in and I get the flash of the led's, then the IG led on the stim board stays lit, and the PMP and the IDL light slowly come on and stay lit.
7. Proceed to try and connect to the board using hyperterminal and reload the firmware.
8. Process times out not being able to connect to the board.
9. Open Megatune, and it is still not seeing the board.
Hopefully this is enough information for anyone to help me. Is this a problem of the battery, or should I be looking for something else? I was up working with it last night trying to get it up and running to only have no success. I have a power supply with me now that when I get back home I am going to try that, I will post my findings, but was hoping for some more leads by the time I get there.
Board acting funny
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
ISUProject
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri Oct 31, 2008 5:14 am
- Contact:
Board acting funny
Sycamore Motorsports
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Board acting funny
Try reloading the code again, and post a screen shot. These often have clues about what exactly is wrong with the board.
Re: Board acting funny
I have exactly same issue now. I use a 12V power supply (110VAC to 12VDC 3A) on JimStim to power on SMD 3.57 board and one V3 board. Before I never notice this problem, since after find the Clock running on realtime display I normally turn the Stim off and continue to assembly.
Initially, I think that the problem could be from MS-II daughter board, so I put the new MS-II daughter boards again and again
. Now, I have three MS-II boards which can not be connected to downloader and Megatune anymore. And I just started to understand that the problem could be from powersupply. I am really really going to cry. Are all of those MS-II daughter board dead forever???
I am going to use a 12V motorbike battery directly for my trouble shooting and have bought 2 more MS-II daugher board from DIYAutoTune few mins ago.
Initially, I think that the problem could be from MS-II daughter board, so I put the new MS-II daughter boards again and again
. Now, I have three MS-II boards which can not be connected to downloader and Megatune anymore. And I just started to understand that the problem could be from powersupply. I am really really going to cry. Are all of those MS-II daughter board dead forever???I am going to use a 12V motorbike battery directly for my trouble shooting and have bought 2 more MS-II daugher board from DIYAutoTune few mins ago.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Board acting funny
It's unlikely you damaged the daughter boards if it is a power supply problem. Usually something on the main board will break first - if anything besides the power supply broke, that is.
Re: Board acting funny
That is good new for me.
And the next question which will be asked by ISUproject probably is that without the RS232 connection, how can we re-download the firmware with BDM?
I do have the BDM kit just bought few days ago, since I am thinking that I will have to repair those MS-II daughter board by myself to continue the trial and error efficiently without waiting overseas delivery. I am still trying to know how to flash the microcontroller.
And the next question which will be asked by ISUproject probably is that without the RS232 connection, how can we re-download the firmware with BDM?
I do have the BDM kit just bought few days ago, since I am thinking that I will have to repair those MS-II daughter board by myself to continue the trial and error efficiently without waiting overseas delivery. I am still trying to know how to flash the microcontroller.