Using the VR circuit with a Hall Sensor?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Using the VR circuit with a Hall Sensor?
I see that you can use the VR circuit with a Hall Sensor, my question is how do you wire the hall sensor and how many volts do you send to it? I'm using a VW crank hall effect sensor. Please help.
Re: Using the VR circuit with a Hall Sensor?
Within this thread I believe it says 5v or 12v, depending on the output level you want: http://www.microsquirt.com/viewtopic.php?f=87&t=22790
But check the datasheet for your sensor -- it may restrict the voltage you use. And the datasheet will likely tell you how to wire it up.
Brian
But check the datasheet for your sensor -- it may restrict the voltage you use. And the datasheet will likely tell you how to wire it up.
Brian
Re: Using the VR circuit with a Hall Sensor?
Thanks Brian I appreciate your help on this.