i have a 4g63 Standa with no modifications. I only want to control the injection of gas, I finally turned it on in cold and hot but i don't know how to do a good acceleration map
I am using the mega tune with the password standa MS1 BG the one that uses 8x8
and another thing, how can i use the table of 12x12 only fuel?
my MEGASQUIRT 1 version 2.2
The motor is 4g63 original in which i am not sure of the size of the injector*
and i want the Rpm to be 5200 full.
would greatly appreciate your help in whatever you can since the car is not in use . I can't use it because of the missing configuration in the acceleration map, thank you.
Please i need help with acceleration enrichments
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Please i need help with acceleration enrichments
Is this a turbo or non turbo 4g motor? Have you looked on any of the dsm sites for others using ms1? I only have access to some turbo maps for a stock 4g63 running on ms1.