VW ABA TURBO MAPS?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
VW ABA TURBO MAPS?
I have an 81 scirocco with an aba 2.0L an a T 25 tubo. Im just curious if anyone has some maps that nay be close for me to start from. The car does run now but Im havin issues tuning when i get into the boost.I am running 25.2lb injectors. I did upgrade to a 4 bar regulator. Also i am running at 9:1 compression. Any help would be appreciated. thx.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: VW ABA TURBO MAPS?
While I don't have a map for this, I may be able to help figure out what's going on if you post a data log of the problem happening along with your MSQ file.
Re: VW ABA TURBO MAPS?
Thx for the reply. I will get a datalog as soon as i possible to post. I am currently running code 2.687. one of my issues that i did realize is that I needed to edit my ve map bins so as to be able to tune under boost. Obviously my "red dot" was running right off the table.This was most likley the biggest cause of my issues. As you can tell this is all new to me so please bare with me.
Re: VW ABA TURBO MAPS?
I have made some progress since the last post. I have however not taken a datalog. I replaced my injectors with some 48 lb ones and edited my map bins an now am having a much easier time. There is a vw club cruise this weekend and I hope to get a better tune by then. Im sure I could still use some help at that point. I will post a datalog and my MSQ after the cruise.
Re: VW ABA TURBO MAPS?
I seem to be having issues with the data logging in MLV. I cant find my saved files. They are not in the project file. Im thinking its an issue with MLV and windows vista. I have a post under the data logging section of the forum. The title is help with data logging. Appreciate some help thx in advance.