odd starting attempt

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
a73camaro

Re: odd starting attempt

Post by a73camaro »

Yeah very clean install! Guess you could use Alpha-N if the MAP doesn't work.
gboone
Helpful Squirter
Posts: 41
Joined: Mon Oct 25, 2004 12:27 pm

Re: odd starting attempt

Post by gboone »

Thanks for the compliments.
Please tell me more about Alpha-N. Hey a73camaro guy, I just noticed you're not too far away from me. Let's go skiing sometime.
Gary
Gary
a73camaro

Re: odd starting attempt

Post by a73camaro »

Sure - make have to be next ski season. Most of the mountains are shutting down.

Alpha-N is a fuel map based on throttle position and RPM. It is another way of controlling the engine but it's not as good as a MAP based system.
Post Reply