Where can i find the opening time of my bosch injectors?
i found the flowrate @ bar and ohm but i cant find the opening time..
Injector opening time
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
john.p.clegg
Re: Injector opening time
Janse
I don't think you can,you have to guess to start with,try 1.0 to 1.2 ,later on by altering the opening times/No of injections and noticing the effect on the afr's will give you a reasonable figure....
John
I don't think you can,you have to guess to start with,try 1.0 to 1.2 ,later on by altering the opening times/No of injections and noticing the effect on the afr's will give you a reasonable figure....
John