pig tail help

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
wildwestsydney
MegaSquirt Newbie
Posts: 18
Joined: Sat Dec 30, 2006 9:17 am

pig tail help

Post by wildwestsydney »

Hi all I am looking for some help finding a pig tail for a TPS. The TPS is from a impala, camaro year 2000. I belive it to be a metripack connector. It is a flat three pin configuration. Any help on where to get one would be great.

thanks

Sam
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: pig tail help

Post by Matt Cramer »

Any chance this might be it? Check the keyway and see if it matches yours.

Image

http://www.DIYAutoTune.com/catalog/posi ... p-360.html
Top
wildwestsydney
MegaSquirt Newbie
Posts: 18
Joined: Sat Dec 30, 2006 9:17 am

Re: pig tail help

Post by wildwestsydney »

Matt that is not it. It would look just like your IAT and coolant pig tails but with one more terminal.

I found a place that had them.

http://www.pcsconnectors.com/12162182.aspx


I think the oficial name is a metripack 150.2

thanks for the help

sam
Top
Post Reply

Return to “Wiring and Sensors”