i figure somebody might know what resistor i should use in my MS for on a ford taurus SHO im running in parallel with stock ECU im using the stock computer to control my cruise control, digital climate control and most importantly my fan since the stock computer uses the VSS and coolant sensor which i like the idea of because the fan will not run above 40mph so it dont burn the fan up... trust me i had one running in the past while i was driving and it wasent pretty.
the reason i figured someone might know is because you can calibrate the thermistor in the settings tab in tunestudio and its accurate even has setting spreset for ford chevy etc.
i did a search and didnt find anything
thanks
FORD thermistor
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
thecrew2999
- MegaSquirt Newbie
- Posts: 32
- Joined: Thu Aug 13, 2009 4:26 pm
Re: FORD thermistor
never mind this can be ignored i noticed on the DIYAutoTune page it has the resistors to buy for the ford clt and iac
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: FORD thermistor
If you're running in parallel and splitting the signal, the correct answer is "none." Our Ford bias resistors are mostly for if you want to use an MS1 on its own without calibrating it with EasyTherm. The real question is what bias resistors the stock ECU has inside it. For how to measure this, see this link:
http://www.megamanual.com/v22manual/sharesen.htm
http://www.megamanual.com/v22manual/sharesen.htm
