changed from vr to opto

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
blackotto
MegaSquirt Newbie
Posts: 19
Joined: Thu Jul 30, 2009 9:50 pm

Re: changed from vr to opto

Post by blackotto »

let this be a lesson to all newbies, READ THE FREEKIN MANUAL!!!ALL OF IT!!! :oops: after much hair pulling and head banging it turns out that i just didnt read enough of the instructions to know that i didnt even setup megatune properly :roll: keep yourself from feeling as stoopid as i do.THANK YOU MATT CRAMER YOU ARE A GOD! your patients and willingness to help are very appreciated :yeah!: it works it works it works!!!!!!! :yeah!: :yeah!:
Top
Post Reply

Return to “MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting”