Trigger wheel setting keeps resetting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
nebraska_e28
- MegaSquirt Newbie
- Posts: 20
- Joined: Tue May 18, 2010 1:01 pm
Trigger wheel setting keeps resetting
In Megatune 2.25 p3, whenever I set the trigger wheel to 60 under "advanced ignition options" it will reset back to zero if I go back in to look at it. Any thoughts here? Also, while cranking the rpm gauge in MT shows clear up to 3k rpm.
-
nebraska_e28
- MegaSquirt Newbie
- Posts: 20
- Joined: Tue May 18, 2010 1:01 pm
Re: Trigger wheel setting keeps resetting
I just tried tunerstudio & it does the same thing.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Trigger wheel setting keeps resetting
Just checking - you do click Burn to ECU before closing the window, right?
-
nebraska_e28
- MegaSquirt Newbie
- Posts: 20
- Joined: Tue May 18, 2010 1:01 pm
Re: Trigger wheel setting keeps resetting
Matt Cramer wrote:Just checking - you do click Burn to ECU before closing the window, right?
Yes I do click burn. If MS is powered up & I then start TunerStudio it complains that the trigger teeth settings are different. It's like somehow this is being overwritten. When cranking to start it shows around 3000rpm, so I know something aint right.
-
nebraska_e28
- MegaSquirt Newbie
- Posts: 20
- Joined: Tue May 18, 2010 1:01 pm
Re: Trigger wheel setting keeps resetting
FIXED. Found 2 errors I made. Tps wasnt hooked up properly & I was set to edis instead of normal coil.
thanks again.
thanks again.