A few years back someone posted a web site for a machine shop that made low cost 4barrel throttle bodies that had the injectors mounted in the side of the TB
I think it was in AZ but not sure. They had several items they machined for fuel injection. My computer crashed and I lost all my info.
Anyone know the name of the shop?
Throttle body maker
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Throttle body maker
I think this is the one you're thinking of.
http://www.auto-nomics.com/cgi-bin/show ... 0850-002-D
If you're looking for the Wilson V-Force, which uses 8 high-impedance injectors, it appears to not be available anymore. I presume it was not a big seller as it was $700.
http://www.thirdgen.org/techboard/alter ... lds-v.html
http://www.auto-nomics.com/cgi-bin/show ... 0850-002-D
If you're looking for the Wilson V-Force, which uses 8 high-impedance injectors, it appears to not be available anymore. I presume it was not a big seller as it was $700.
http://www.thirdgen.org/techboard/alter ... lds-v.html
Needs to get the toes out of the water and just jump off the diving board!!!
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Throttle body maker
I saw a V-Force throttle body in action at the Virginia MegaMeet - there was probably another reason it was discontinued. The fuel distribution on it was pretty terrible. It had the injectors below the throttle blades, a setup no OEM TBI design ever used, for good reason.
