Edis 8 on twin spark V8?
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Edis 8 on twin spark V8?
Just wondering if anyone has run a twin spark V8 using Edis 8 module?
I want to run the Merc 113 series motor using Megasquirt and Edis 8 but it has 2 plugs per cylinder
with one coil for each pair.To use Edis I would have to fire two coils together (4 plugs).Is the Edis
capable of this (excessive load)?
Cheers,
Phil.
-
a73camaro
Re: Edis 8 on twin spark V8?
Re: Edis 8 on twin spark V8?
MY MB knowledge drops of fast after M130 around 1972. MB M113 is a bit to modern for me, but anyway. I GUESS thetwo pugs per cylinder are not firing at the same instant but that one fires 5 to 10 crank degrees after the first. If so, you will loose some power if you fire both plugs together.
Best regards
Heribert
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Edis 8 on twin spark V8?
Re: Edis 8 on twin spark V8?
Thanks for the replies - as far as I know the two plugs are fired together.
I think running two Edis 8 modules from the same SAW and crank signals is the best option.
I have used MS previously, about 5-6 years ago I fitted a Rover V8 to a Sierra Cosworth replica.
I am a big fan of the Rover V8 but there are better options out there these days.I like the M113
because it is very light and quite compact for it's displacement (single cam 3valves per cylinder).
Thanks again,
Phil.
-
molecularbob
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Dec 13, 2010 6:23 am
Re: Edis 8 on twin spark V8?
Looks a very impressive engine, do you know what it weighs with the supercharger fitted?, was looking at the 4.0 lexus, but this has got me thinking.
Re: Edis 8 on twin spark V8?
I intend using an SL500 engine initially but have also got a 4.3 and an AMG supercharged.I have weighed these, and a number of other candidates and from memory the 4.3l weighed in at just under 180kg, the supercharged just under 200kg.The low weight and compact design make the M113 a good choice for transplants into smaller lighter vehicles.The earlier Merc M119 (5.0l) weighs around 240kg, and from memory the 1uzfe weighs around 220kg.
The Lexus V8 is a fine engine, several sump options and starter motor located in valley but power not the best unless turbo'd / supercharged.I have all the weights and specs in a spreadsheet somewhere, if I can track it down I will post it.The weights quoted were all obtained with the same load cell which had not been calibrated, but a Rover V8 came in at 155-160kg which is about right.
Cheers,
Phil.
