Wiring Batch Fire Injectors on a 6 Cylinder

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
andyborris
MegaSquirt Newbie
Posts: 14
Joined: Wed Jan 12, 2011 9:49 am

Wiring Batch Fire Injectors on a 6 Cylinder

Post by andyborris »

I'm installing MS2 V3.0 onto a Triumph 6 cylinder engine (same engine as found in a TR6).

The MS is a batch fire, the engines firing order is 1,5,3,6,2,4 , is it worthwhile having 153 as one batch and 624 as the other?

Or should I just wire in the neatest way, 1,2,3 (batch 1) and 4,5,6 (batch 2)?

I got the impression (from the Forum) that the V8s run slightly better when the injectors are wired to the firing order, just wondering if a 6 would show any benefit?

Thanks

Andy
Top
Stag76
MegaSquirt Newbie
Posts: 18
Joined: Tue May 09, 2006 4:56 pm
Location: Toowoomba Qld australia

Re: Wiring Batch Fire Injectors on a 6 Cylinder

Post by Stag76 »

1,2,3 and 4,5,6 works well. I haven't tried other combinations.
Top
jcarruthers
Helpful Squirter
Posts: 35
Joined: Tue Mar 30, 2010 4:26 am

Re: Wiring Batch Fire Injectors on a 6 Cylinder

Post by jcarruthers »

Mine are paired up for odd and even. Seems to work :)
Triumph 2000 Mk1 — MS3+MS3X, 36-1, wasted spark — Install Details
Triumph Spitfire Mk3 - clockwork
Twitter
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”