crazy jeep o2 sensor

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Arsanders
MegaSquirt Newbie
Posts: 7
Joined: Sun Apr 11, 2010 6:34 am

crazy jeep o2 sensor

Post by Arsanders »

MS2 v3
standard BG code
Got her running in my 4.0
Havent done a full install yet just running on the bench
Stock 89 renix 02 sensor shows 2.5 volts at stoic
Same slope as my lc1 wideband
Why cant i keep my sensor and just use a spare output port to kill the heater relay after warm up?
Checked the renix manual and it seems to behave just like a wideband. :?
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: crazy jeep o2 sensor

Post by Matt Cramer »

That's odd, I thought this one would have a narrow band. But if you can confirm it has the same slope as an LC-1, I don't see why it wouldn't work.
Top
Arsanders
MegaSquirt Newbie
Posts: 7
Joined: Sun Apr 11, 2010 6:34 am

Re: crazy jeep o2 sensor

Post by Arsanders »

The renix manual says when its rich, the voltage is less then 2.5. When lean, Its above.
Top
Post Reply

Return to “Wiring and Sensors”