No major changes here, just some improvements and fixes, including:
- several changes to make VR tach detection logic more robust
- fixed a variable overflow bug in afterstart warmup
- improvements for maf options and improved calculation of fuel pulsewidth when using maf
- fixed injector test mode
- made improvements in CAN comms for GPIO devices such as the transmission controller
- improvements in the ini file, including a MAF table burner and clarification to alphaN mode logic
This code has been around for quite a while and is very stable, so it should be used for all new applications and for anyone who might have problems in the areas of improvement. Files are atatched. Make sure to use thr new ini with this new code.
new code version 2.905 release
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
new code version 2.905 release
You do not have the required permissions to view the files attached to this post.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: new code version 2.905 release
Users can also get this code here: http://www.megamanual.com/ms2/code.htm
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
LT401Vette
- Master Squirter
- Posts: 481
- Joined: Sat Jul 16, 2005 7:07 am
- Location: Charlotte, NC
- Contact:
Re: new code version 2.905 release
I have also included this ini in the latest TunerStudio Installer 1.003
Phil Tobin
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu
-
jonfx4com
- MegaSquirt Newbie
- Posts: 15
- Joined: Fri Nov 18, 2005 7:30 am
- Location: North of UK
- Contact:
Re: new code version 2.905 release
I noticed that 2.920 is out. What are the changes in that version? Is there a change log somewhere that I can refer to.
Maybe unrelated but I have from time to time had a problem with WUE still being "on" in Tuner Studio when I am well past the warm up enrichment temperature defined in my MSQ file, was hoping that would be fixed in 2.920. Don't really want to update to a new version when my car is running so well without knowing what has changed.
Maybe unrelated but I have from time to time had a problem with WUE still being "on" in Tuner Studio when I am well past the warm up enrichment temperature defined in my MSQ file, was hoping that would be fixed in 2.920. Don't really want to update to a new version when my car is running so well without knowing what has changed.