Hello,
I am having starting issues with my truck. I have been having this issue since day one but now its just annoying me being its the only thing left and isnt "right". The problem is I have to crank my engine with the fuel pump off, hold my throttle at like 30% and crank it a rew rotations then flick the pump and it will fire right up. If I try and start it with the pump on and just cranking it will not start. Basically I can not crank it with the pump on or it wont start. I have to crank it a bit with the pump off then flick it on for the truck to start. I have some really high cranking pulsewidth's and I have tried to lower them and it makes it not start at all. Any help or input is apprecitated.
Set-up
6.0 ls1
ms1 controlling fuel only
Msd 6010 controlling ignition
60lb injectors
Help with starting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Help with starting
You do not have the required permissions to view the files attached to this post.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Help with starting
That sounds like too much cranking pulse width.
Re: Help with starting
Correct, played with it some more today and now all is well 