injectors stimulator up to 15000 rpm

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
suzin
MegaSquirt Newbie
Posts: 2
Joined: Sun Jul 17, 2011 7:03 am

injectors stimulator up to 15000 rpm

Post by suzin »

hi i am looking for injectors stimulator so as i could adjust speed up to 15000rpm. It should operate up to 6 -8 injectors. They should work full group. It should work with saturated and peak and hold injectors. Is megasquirt the right way to go?
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: injectors stimulator up to 15000 rpm

Post by Matt Cramer »

MS2 has an injector test mode that can do this.
suzin
MegaSquirt Newbie
Posts: 2
Joined: Sun Jul 17, 2011 7:03 am

Re: injectors stimulator up to 15000 rpm

Post by suzin »

Matt Cramer wrote:MS2 has an injector test mode that can do this.
Can this be done on a table?


thanx
Nitrobanshee
MegaSquirt Newbie
Posts: 9
Joined: Mon Apr 24, 2006 8:51 am
Location: NC.

Re: injectors stimulator up to 15000 rpm

Post by Nitrobanshee »

suzin wrote:
Matt Cramer wrote:MS2 has an injector test mode that can do this.
Can this be done on a table?


thanx
Yes
1995 Nissan Pickup truck running Megasquirt V2.2 MSII 2.881 EDIS with a turbo.
Dyno #s 354WHP 381Foot pounds
KA24E-t Power
Post Reply