Hi Again
I just got my new cpu from Al [old one exploded] today!!! I plugged it into MS and hooked up stim. Every thing appears okay but CLT & IAT will only go from 38 deg to 170 deg this is with volts of 0 to 4.00vdc @ ad2-1 the r8 reads 2.19k. I have 10vdc in to stim. I poked around with the vom [which is by no means calibrated] and r7 and r4 read totally different and neither reads 2.49k both low. Are the temp readings normal on the stim? I can't find any reference to what gauges should read on the stim.
Only read 38 to 170 deg F
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
fierospike
- MegaSquirt Newbie
- Posts: 3
- Joined: Sun Sep 26, 2004 9:07 am
- Location: middletown PA
Only read 38 to 170 deg F
85 Silver SE 2M4
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project
-
fierospike
- MegaSquirt Newbie
- Posts: 3
- Joined: Sun Sep 26, 2004 9:07 am
- Location: middletown PA
Only read 38 to 170 deg F
THANK YOU LANCE
I was sitting here with soldering iron in hand ready
to replace every thing in the circuit but I guess I plug
it into car and seeing what happens next.
Thanks again
I was sitting here with soldering iron in hand ready
to replace every thing in the circuit but I guess I plug
it into car and seeing what happens next.
Thanks again
85 Silver SE 2M4
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project
-
fierospike
- MegaSquirt Newbie
- Posts: 3
- Joined: Sun Sep 26, 2004 9:07 am
- Location: middletown PA
Only read 38 to 170 deg F
Got that right !!! Anyway MS is up and running fine. Added fast idle solenoid with relay and replaced IAC with fabricated idle adjustment which I have to say works quite well. Need some more time tuning cold start band warm-up.
Thanks again ! Because without you guys and this MS unit my project was dead in the water and headed to a recycling yard...
Thanks again ! Because without you guys and this MS unit my project was dead in the water and headed to a recycling yard...
85 Silver SE 2M4
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project
86 Black Sport Coupe 2A4
85 Red SE 2M4 Turbo'd project