EFI Analytics software

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
cbx1147
MegaSquirt Newbie
Posts: 4
Joined: Wed Mar 29, 2006 1:39 pm

EFI Analytics software

Post by cbx1147 »

I just upgraded my MS-I to an MS-II by adding the daughterboard and current firmware. Now I have to use TunerStudio MS for tuning. I was wondering if it is worth buying the registered version or should I stay with the free version? Does the VE Analyze Live feature really work?
Thanks
kjones6039
Master Squirter
Posts: 618
Joined: Sat Jul 22, 2006 7:02 pm
Location: Eureka, Nevada USA
Contact:

Re: EFI Analytics software

Post by kjones6039 »

cbx1147 wrote:I just upgraded my MS-I to an MS-II by adding the daughterboard and current firmware. Now I have to use TunerStudio MS for tuning. I was wondering if it is worth buying the registered version or should I stay with the free version? Does the VE Analyze Live feature really work?
Thanks
You will need the registered version to use VEAL. IMO it is far superior to MegaTune.

VEAL works very well and is well worth the price of registration!

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
trakkies
Super Squirter
Posts: 1162
Joined: Tue Dec 30, 2008 3:06 am
Location: SW London, UK

Re: EFI Analytics software

Post by trakkies »

cbx1147 wrote:I just upgraded my MS-I to an MS-II by adding the daughterboard and current firmware. Now I have to use TunerStudio MS for tuning. I was wondering if it is worth buying the registered version or should I stay with the free version? Does the VE Analyze Live feature really work?
Thanks
My feeling is it's only fair to pay a modest sum for software that's being continually developed. Especially in these hard times where the parent company may not be making as much profit as once. And I do find VEAL useful.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
cbx1147
MegaSquirt Newbie
Posts: 4
Joined: Wed Mar 29, 2006 1:39 pm

Re: EFI Analytics software

Post by cbx1147 »

I will probably do that then. I just wanted to know if their claims were accurate before I spent the money. I found the Megatune auto tuning feature to be not very useful.

Thanks for your replies.
convertables_10
Helpful Squirter
Posts: 104
Joined: Wed Jul 21, 2010 9:18 am

Re: EFI Analytics software

Post by convertables_10 »

Best money i have spent on software. I used the the free version for about an hour before i upgraded. Veal works excellent used it this morning to retune my ve tables and its spot on to what i wanted. Worth what you will pay. The trigger logger with extra code is awesome as well.
My MegaSquirt build 85 S-15 Jimmy 350/th350 TPI MS2 2.905 hei 8pin
1983 s-10 350 tpi injection MS2 soon
1984 s-10 Blazer 350/th350 and will get an MS2 tbi.
1973 Nova 5.3/glide 76mm turbo. MS3X
floppy
Helpful Squirter
Posts: 75
Joined: Thu Mar 16, 2006 8:38 pm
Location: roseville,ca

Re: EFI Analytics software

Post by floppy »

Absolutely worth the money!!
500 cid Cadillac in an FJ40, MSII, 2.905,1000 cfm auto-nomics throttle body w/4 52#port injectors.
Simple Simon
MegaSquirt Newbie
Posts: 6
Joined: Sun Aug 22, 2010 2:40 am

Re: EFI Analytics software

Post by Simple Simon »

floppy wrote:Absolutely worth the money!!
Exactly, worth every penny :D
Post Reply