In the Tuning instructions for Air Cooled engines is mentions that I must set the "# set EXPANDED_CLT_TEMP" section in the ini file but there is now direction as to where or which ini file they are talking about. Can someone help?
Thanks
Frank
# set EXPANDED_CLT_TEMP:
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
falconfp2001
- MegaSquirt Newbie
- Posts: 1
- Joined: Wed Mar 14, 2012 2:01 pm
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: # set EXPANDED_CLT_TEMP:
Frank,
In TunerStudio you can set this in TS under 'File/Project/Project Properties/Settings'. This edits the code's INI file. The file is one of these: http://www.megamanual.com/files/ini/ that corresponds to your code version but is usually renamed to mainController.ini (in the projectCfg folder of the project) by TunerStudio.
If you want to edit the ini manually, download the appropriate ini file, and use notepad or a similar text editor. The reload the ini you just edited to the project using 'File/Project/Project Properties', check the 'Other' check box, and navigate to the file you edited.
Lance.
In TunerStudio you can set this in TS under 'File/Project/Project Properties/Settings'. This edits the code's INI file. The file is one of these: http://www.megamanual.com/files/ini/ that corresponds to your code version but is usually renamed to mainController.ini (in the projectCfg folder of the project) by TunerStudio.
If you want to edit the ini manually, download the appropriate ini file, and use notepad or a similar text editor. The reload the ini you just edited to the project using 'File/Project/Project Properties', check the 'Other' check box, and navigate to the file you edited.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw