Second Hand Megasquirt ID

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
fixitbaz
MegaSquirt Newbie
Posts: 2
Joined: Mon Nov 05, 2012 1:53 pm

Second Hand Megasquirt ID

Post by fixitbaz »

Hi All

New to all this so any help would be appricated. I bought a second Megasquirt 2 V3 with sister board fitted, this Megasquirt was factory built originally not a DIY kit as I can tell by the soldering on the main board.

:shock: :shock: When I opened it up to have a look inside I could see that someone has carried out some modifications to it. Can anyone tell me what the modifications are on this Megasquirt. I have pasted 3 limks below to some photos that clearly show all the modifications. :shock: :shock:

Image
Image
Image

If these modifications asre to improve the Megasquirt I will leave it as be but if not I will revert it back to original. I would like this Megasquirt to control my Rover V8 4.6ltr.

Thank
Barry
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Second Hand Megasquirt ID

Post by Matt Cramer »

Looks like a home build of a DIYAutoTune.com V3.0 kit. No processor, so I can't tell if it's MS1 or MS2. It looks as if it has several mods for the Extra code (see MSExtra.com) - looks like it's set up for VR input and two spark outputs. And for some reason the current limiting circuits on the injector drivers has been bypassed.
Top
fixitbaz
MegaSquirt Newbie
Posts: 2
Joined: Mon Nov 05, 2012 1:53 pm

Re: Second Hand Megasquirt ID

Post by fixitbaz »

Hi

Thanks for the reply it does have the MS2 Sister Board but I removed it to get better phots of the mods.

As I am new to all this would it be better for me to remove the mods and revert it back to satndard as a starting point as I want it to control my Rover V8 4.6ltr spark and fuel :?: :?: :?:

Barry
Top
Post Reply

Return to “General Information”