megasquirt on aircraft engine

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
josh_2562
MegaSquirt Newbie
Posts: 1
Joined: Tue Dec 04, 2012 3:44 am

megasquirt on aircraft engine

Post by josh_2562 »

I have a continental 0520 on a airboat that I would like to use megasquirt on. I would like to use tbi with ford edis. The engine is 520 cubic inches with Max rpm of 3000rpm. Which megasquirt should I go with? I plan to buy a completed kit from DIY. Thanks for the help.
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: megasquirt on aircraft engine

Post by Matt Cramer »

Usually I'd be thinking MS2 unless there is anything you need specifically beyond fuel and ignition control.
Top
Post Reply

Return to “General Information”