I just moved from Colorado ( 5000' elev ) to Texas ( 400' elev ) and need to get back up to speed on tuning my existing MS2 setup - I haven't really changed much in 5? years.
I'd like to get the latest of everything. I just purchased the Android logging app and had purchased the laptop based tuning software a while back. Has much changed in 2-3 years - where should I start? haha
Thanks all!
Been away for a couple years - where to start
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
fordfanboi
- Helpful Squirter
- Posts: 74
- Joined: Mon Dec 19, 2005 11:36 pm
- Location: Central Texas
- Contact:
Been away for a couple years - where to start
MS II v3.0 (2.920), 408ci, Holley 900cfm TBI, Victor Jr, Mech Roller 254/260@0.050 - 0.642/0.578
-
fordfanboi
- Helpful Squirter
- Posts: 74
- Joined: Mon Dec 19, 2005 11:36 pm
- Location: Central Texas
- Contact:
Re: Been away for a couple years - where to start
Found my registration for TunerStudio and grabbed the latest as well as the latest Shadow Logger. Next place I'm looking is: http://www.megamanual.com/ms2/code.htm My existing setup should still function with the latest .s19, correct? ( version is listed in sig I think )
MS II v3.0 (2.920), 408ci, Holley 900cfm TBI, Victor Jr, Mech Roller 254/260@0.050 - 0.642/0.578
-
fordfanboi
- Helpful Squirter
- Posts: 74
- Joined: Mon Dec 19, 2005 11:36 pm
- Location: Central Texas
- Contact:
Re: Been away for a couple years - where to start
I went ahead and left the firmware alone and have a pretty stable tune for the new altitude. I did update TunerStudio / Mega Log Viewer however.
I'm ready to update the firmware. After updating the firmware, will I need to try to recall the settings or will all settings migrate without issue? Basically, can I follow the steps to download the latest firmware and INI then be done?
Thanks!
I'm ready to update the firmware. After updating the firmware, will I need to try to recall the settings or will all settings migrate without issue? Basically, can I follow the steps to download the latest firmware and INI then be done?
Thanks!
MS II v3.0 (2.920), 408ci, Holley 900cfm TBI, Victor Jr, Mech Roller 254/260@0.050 - 0.642/0.578
-
drholl
Re: Been away for a couple years - where to start
This previous post was too good to pass up. It's almost exactly my situation, but in reverse.
In my case I moved from California (elev. 37) to Colorado (elev. 7,000).
Anyway, I got a new computer for the house and changed my e-mail address.
I would like to upgrade the programs MegaTune or TunerStudio and MegaLogViewer so I can work with the old 2.88 programing in the 71 Monti Carlo and the 59 Cadillac with the 502 Chevy in it. It runs fine and gets 25 MPG but the altitude difference means I should correct a few things.
So since I need to change my e-mail address, where should I go for that change?
I still have all my registration information for the TS and the MLV. Where should I go to update the information and get any updates?
Almost Forgot, my new e-mail is
Drholl@powerc(dot)net
Thanks guys. It’s been a long time.
Holl
In my case I moved from California (elev. 37) to Colorado (elev. 7,000).
Anyway, I got a new computer for the house and changed my e-mail address.
I would like to upgrade the programs MegaTune or TunerStudio and MegaLogViewer so I can work with the old 2.88 programing in the 71 Monti Carlo and the 59 Cadillac with the 502 Chevy in it. It runs fine and gets 25 MPG but the altitude difference means I should correct a few things.
So since I need to change my e-mail address, where should I go for that change?
I still have all my registration information for the TS and the MLV. Where should I go to update the information and get any updates?
Almost Forgot, my new e-mail is
Drholl@powerc(dot)net
Thanks guys. It’s been a long time.
Holl
-
LT401Vette
- Master Squirter
- Posts: 481
- Joined: Sat Jul 16, 2005 7:07 am
- Location: Charlotte, NC
- Contact:
Re: Been away for a couple years - where to start
Email support <at> efianalytics. com with verification that you are the same person that originally registered it.
Phil Tobin
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu