Have an old Hirth 292cc 2-stroke I want to squirt. I've done a micro and currently have an MS3pro. This time I want to build a kit version and am looking at the MSII. Just looking for advice on what kit would be best to build and is the O2 sensor going to survive a pre-mix? Never injected a 2-stroke before just looking for some advice to which direction to go. I'm a V8 guy so I would like to use one 585 LS coil/ 36-1 trigger/ map/O2/TPS/and thinking Manifold surface temp sensor on head? There is no coolant. Will this work? What is the least expensive kit my son and I can build together to make this work. Not racing here. He is 8 and loves to solder. This going into a back yard go-cart.
Thanks in advance,
C. Henderson
Single Cyl Air Cooled 2-Stroke
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Single Cyl Air Cooled 2-Stroke
Just so you know, first time posts are sent to a moderation queue in this forum instead of instantly appearing. This was put in place due to spam issues.
MS2 kits only come in one variant at this point, the MS2 V3.0.his time I want to build a kit version and am looking at the MSII. Just looking for advice on what kit would be best to build
It is likely to reduce the sensor lifespan a bit, but not nearly as much as leaded race gas would.and is the O2 sensor going to survive a pre-mix? Never injected a 2-stroke before just looking for some advice to which direction to go.
Sounds like a plan!I'm a V8 guy so I would like to use one 585 LS coil/ 36-1 trigger/ map/O2/TPS/and thinking Manifold surface temp sensor on head?
Re: Single Cyl Air Cooled 2-Stroke
Thanks Matt! Just wanted to make sure I was on the right track.