connection trouble.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
connection trouble.
hi guys. i'm in the process of assembling an ms1 v2.2. i'm up to testing the connection, and haven't had much luck. my cable and usb-serial adaptor tested ok with 2 and 3 bridged on hyperterminal. it doesn't seem to find the processor on tunerstudio or megatune. i've read the connection page http://www.megamanual.com/connect.htm#ms1. it seems to contradict the assembly instructions with the pinout of the db9 connector. can anyone tell me which is right? can anyone link me to the latest set of assembly instructions? the ones i've been using are the ones linked to this site.