Custom EDIS wheels

[gd2fast4u]

Custom 36-1 tooth wheels.

http://www.alpineprecision.com/Megasquirt.htm

Editted by renns: Fixed dead link (was: http://www.alpineprecision.com/3rd.htm)





.

[Keithg]

NAPA part numbers are:
CSS304 = wheel ($10) (the wheel has a large hole, about 1" in the middle)
CSS411 = sensor ($25) (body diameter is about .50")

[jenna]

for those in the UK.. these parts are also available from

http://www.webcon.co.uk/
sadly there at the usual highly inflated uk price!


jenna

[wickedslowAE86]

let me just give gordon a plug... i ordered one of his wheels, and due to my stupitidy it is to small to fit on my crankshaft pulley. i should have measured first. anyway, he was very understanding and offered to let me return it for a refund. excellent customer service.
let me also mention that this is a very quality piece, much better than the junkyard piece of crap that i had to use instead.
gordon is a recomended seller in my book.