Page 1 of 1
Easy injector wiring question (with illustration!!!!!!!!!)
Posted: Sat Mar 11, 2006 12:39 pm
by AlHounos
Is this how one wires injectors with 2 alternating banks on a 4 cyl? Does it matter which prong on the injector goes to 12v or the ecu? (Are they non-polar?)
Thanks.
Posted: Sat Mar 11, 2006 8:01 pm
by AlHounos
Thanks!
Posted: Tue Mar 14, 2006 9:47 am
by Traction Issuez
Additional quick question that I haven't been able to locate. On a V8 application, because of the bank to bank layout, the yellow wire would actually be wired into 4 injectors on one side and the orange wire would be wired into 4 injectors on the other side?
Sorry for the question but I just received my harness last night and I'm a little confused by the schematic. Since the MS has the capacity to run 16 injectors then I'm "guessing" that each wire from the harness has the capacity to run 4 injectors. Is that the case or does each wire have the ability to run 4 high impedence injectors or 2 low impedence injectors?
thanks,
issuez