MSefi.com read only forum (Jan.15,2018)

Building a car to run individual throttle bodies with injection controlled with a MS-II V3 and sparks courtesy of an EDIS4 set up.

I have a question about the 36-1 trigger wheel though, is there a specific size of wheel that I need to use? I have been looking at www.triggerwheels.com for the wheel but there are several different sized wheels.

Does the outside diameter matter as long as it is 36-1?

Thanks,

Spud

Size does not matter. Pick up whatever you feel suites your pulley size.

Size doesn't matter. I'm running a 1-3/8" diameter 72-2 wheel inside a distributor housing with no problems. The pickup is the stock Mazda VR pickup, not the Ford part.

Roger.