MSefi.com read only forum (Jan.15,2018)

I was just thinking today that I may have my injector wired wrong.

Sinlge cylinder four stroke 350cc
injections per cycle: 2
injector staging: simultaneous
number of cylinders: 2 (due to crank ignition trigger)
injector port type: port
injectors: 1
odd fire

From memory I have pins 32, 33, 34, 35 all wired to the single injector. Is this right or should I have only two of the four wired to the injector

Also
MSI ver 2.2

the bike is running well and i am just fine tuning on a regular basis. If I have a wiring problem I would like to fix it.

thanks

From what Ive read on a sucessful setup. MS&S on a car, it should be fine if you have simultanious injection to have it off just one of the outputs. I chose bank 1 for personal preference. (it's not going yet but this is not the problem) Im hoping to have duel rails in the future.