Page 1 of 1
Autotune help
Posted: Fri Aug 31, 2007 10:51 pm
by Kurt A
What triggers the autotune fault, "tuning point outside window". I am well within my VE table when I trigger the autotune function but the above fault triggers instantly when I try to use autotune.
Kurt
Re: Autotune help
Posted: Sat Sep 01, 2007 12:34 am
by jol
You're within the ve-map but outside the autotune window, have a read about the limits here:
http://www.megamanual.com/megatune.htm#autotune
Posted: Sat Sep 01, 2007 11:36 am
by Kurt A
I have read that portion at least 15 times and still am not sure what I am doing wrong. I have my EGO settings as per the manual. I can see that the custom.ini. file needs to be changed for my application but have no idea on how to change it. My computer says that it can not open the file. Do I require a special program to edit the custom.ini. file?
Kurt
Posted: Sun Sep 02, 2007 5:26 pm
by Kurt A
Ok,
got the file open and edited and autotune now works.
Kurt
Posted: Tue Sep 04, 2007 6:20 am
by Jack
Kurt A wrote:Ok,
got the file open and edited and autotune now works.
Kurt
I had the same issues. it's seems impossible, until you get it working. <Grin>
Jack
Re: Autotune help
Posted: Sat Dec 11, 2010 11:32 am
by madk4speed
Same problem over here. I read carefully that link, if i understand correctly I only need to copy&paste that piece of code to the end of the system.ini file? Or do I have to delete also something in the file?
Also I am not quite sure which one system.ini file I need to fix. For example:
c:/program files/megasquirt/ms2 extra 210/mtcfg (here is my project)
or
c:/program files/megasquirt/megatune225/mtcfg/
or
c:/program files/megasquirt/megatune225/mtcfg/carmtcfg
???