Can I recover my temp values from EasyTherm

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
kritip
MegaSquirt Newbie
Posts: 21
Joined: Thu Jul 26, 2007 3:49 am

Can I recover my temp values from EasyTherm

Post by kritip »

I wanted to update my MS1 high res controller today, but i couldn't find the list of tempertaures and resistances i calculated.

I have the Magnetti Marelli specs for the IAT, but not for the CLT.

I don't want to really pull the sensor, loose coolant, make a mess and halve to calculate them again.

I know on this laptop i did the EasyTherm calibration last time, so is there any way i can recover the resistance/temp values from the megasquirt, or the inc files i copied to my MS directory?


Cheers,

Kristian
Top
kritip
MegaSquirt Newbie
Posts: 21
Joined: Thu Jul 26, 2007 3:49 am

Post by kritip »

Apologies, I poked my nose into the inc files, and they are commented in there.

Please ignore me :D

Kristian
Top
woh
MegaSquirt Newbie
Posts: 4
Joined: Sat Aug 27, 2005 1:19 am
Location: Colorado, USA
Contact:
Contact woh

Re: Can I recover my temp values from EasyTherm

Post by woh »

kritip wrote:I have the Magnetti Marelli specs for the IAT, but not for the CLT.
Kristian
Please list the values so others may use them.
Top
kritip
MegaSquirt Newbie
Posts: 21
Joined: Thu Jul 26, 2007 3:49 am

Post by kritip »

must sleep right now lol, but i'll post the pdf for the one, and my values for the other tomorrow evening :)

If i don't by saturday, i forgot, so post again and i'll get a reminder :)
Top
Dariocc
MegaSquirt Newbie
Posts: 8
Joined: Thu Mar 20, 2008 5:02 pm
Location: Mendoza - Argentina

Re: Can I recover my temp values from EasyTherm

Post by Dariocc »

remember to post the values.... :D thanks!
Top
kritip
MegaSquirt Newbie
Posts: 21
Joined: Thu Jul 26, 2007 3:49 am

Re: Can I recover my temp values from EasyTherm

Post by kritip »

I don't know what i was on about, but i just checked my archive, and i have the WTS_05 CLT sensor, but NOT the IAT sensor. I must have got confused.

Tech sheets can be found here for the CLT:

http://www.mmcompsys.com/motorsports_se ... ature.html
MS2 Extra 2.0.1
4 x IRGB14C40LPbF driving wasted COP's BAE403
VR input (60-2 OEM wheel and sensor)
No relay board
4 cylinder n/a, 16v 1368cc Fiat Seicento
Top
Post Reply

Return to “Wiring and Sensors”