MSQ files

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
onekickkawi
MegaSquirt Newbie
Posts: 3
Joined: Thu Jun 19, 2008 3:13 pm

MSQ files

Post by onekickkawi »

i have looked around and havent found anyone really posting their MSQ files. I am trying to setup MS for a VG30E (85 300ZX) and was hoping to compare mine someone else's. Does anyone have a MSQ file or know where to point me?
Top
onekickkawi
MegaSquirt Newbie
Posts: 3
Joined: Thu Jun 19, 2008 3:13 pm

Re: MSQ files

Post by onekickkawi »

I can't be the only one that has wondered if there is a list of MSQ files or maps
Top
onekickkawi
MegaSquirt Newbie
Posts: 3
Joined: Thu Jun 19, 2008 3:13 pm

Re: MSQ files

Post by onekickkawi »

thanks for the advice, I just get a little lost in some parts of tuning
Top
Post Reply

Return to “Tuning Fuel and Air”