ford tps

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
mataston
MegaSquirt Newbie
Posts: 16
Joined: Thu Dec 02, 2004 4:01 am
Location: west midlands uk

ford tps

Post by mataston »

i have a ford tps and throttle body of a ford mondeo, i have wired up the tps and calibrated it.
on closed throttle it records 0, when i record the current at full throttle it reads 4!
is this normall for a ford tps i thought the count would be higher than that, can some one confirm if they have the same with there ford tps???

thanks mat
john.p.clegg

Re: ford tps

Post by john.p.clegg »

Mat
I can confirm you have something wrong,mine reads something like 30 to 197 if I remember correctly..
John
Minami Kotaro
Helpful Squirter
Posts: 48
Joined: Sun Sep 12, 2004 3:41 pm
Location: Somewhere in TN

Re: ford tps

Post by Minami Kotaro »

mataston wrote:i have a ford tps and throttle body of a ford mondeo, i have wired up the tps and calibrated it.
on closed throttle it records 0, when i record the current at full throttle it reads 4!
is this normall for a ford tps i thought the count would be higher than that, can some one confirm if they have the same with there ford tps???

thanks mat
The TPS is probably bad. I've had two go bad on me, and they exhibited similar behavior to that.
1967 VW Beetle turbo
v3.57 board, MSNS-e 029v, EDIS
Check out my ongoing success story.
Post Reply