Small Engine injectors

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
jadog
MegaSquirt Newbie
Posts: 2
Joined: Fri Oct 17, 2008 11:09 pm

Small Engine injectors

Post by jadog »

I have been searching everywhere trying to find out where to buy injectors for a small engine. I am injecting a 5hp Honda motor it Shows I need 3.2 lb/hr injector. Where can I buy these?
Or how can I make something that works?

Thanks, Jason
jadog
MegaSquirt Newbie
Posts: 2
Joined: Fri Oct 17, 2008 11:09 pm

Re: Small Engine injectors

Post by jadog »

Ok just to help out anyone else that is doing a small engine you should probably look at Ebay for motorcyle throttle bodies or Kehin fuel injectors. Im buying a motorcycle throttle body because I get the injectors wiring and the tps built on. I don't know if it will work yet butt hope fully this helps other new people.
http://www.keihin-us.com/oem/products/fuel_injectors/
Post Reply