Page 1 of 1
Injector staging-MSII
Posted: Fri Mar 06, 2009 8:07 pm
by Slowride
On my turbo ACVW I have my injectors set at 2 squirts/simultaneous and am seeing duty cycles over 100%. If I change to 2 squirts/alternating will this require a complete re-tune of the VE table ?
Re: Injector staging-MSII
Posted: Mon Mar 09, 2009 6:07 am
by Matt Cramer
May need minor tweaks if the opening time is not quite right. If the opening time is spot on, in theory you won't need any changes.
Re: Injector staging-MSII
Posted: Mon Mar 09, 2009 1:32 pm
by devastator
I changed mine in exactly the opposite way and it required minor VE changes, mostly at idle. Try the req_fuel first. Don't forget the injection timing delay as a cool way to dial in the idle.